The Department of Mechanical Engineering at The University of Texas at El Paso Proudly Presents Southwest Emerging Technology Symposium 2016 Saturday, April 9th, 2016 The University of Texas at El Paso 500 W. University Ave. El Paso, Texas 79968 Southwest Emerging Technology Symposium 2016 April 9th, 2016 Wyndham Airport Hotel 2027 Airway Blvd El Paso, TX 79925 Department of Mechanical Engineering College of Engineering The University of Texas El Paso 500 W. University Ave. El Paso, Texas 79968 Phone: (915)-747-5450 Fax: (915)-747-5019 [email protected] Web Link: http://engineering.utep.edu/sets/ FOREWARD Welcome to the Southwest Emerging Technologies Symposium sponsored by Shell. The purpose of the symposium is to encourage communication among the engineers and scientists in and around the El Paso area's universities and industries. The following individuals and organizations are acknowledged for their assistance with the symposium. Conference Chair: Dr. Ahsan Choudhuri, The University of Texas El Paso Technical Chair: Dr. Yirong Lin, The University of Texas El Paso Dr. Pavana Prabhakar, The University of Texas El Paso Dr. Norman Love, The University of Texas El Paso Logistics Committee: Gloria Salas, The University of Texas El Paso Linda Luna, The University of Texas El Paso Hosted by: College of Engineering Department of Mechanical Engineering & MIRO Center for Space Exploration and Technology Research (cSETR) The University of Texas at El Paso Welcome and Introduction: Dr. Ahsan Choudhuri Session Chairs: Dr. Samia Afrin, The University of Texas at El Paso Mr. David Espalin, The University of Texas at El Paso Dr. Louis Everett, The University of Texas at El Paso Mr. Michael Everett, The University of Texas at El Paso Dr. Angel Flores, The University of Texas at El Paso Dr. Cesar Garcia, Lockheed Martin Aeronautics Mr. Charles Scott Hill, The University of Texas at El Paso Dr. Deidra Hodges, The University of Texas at El Paso Dr. Arifur Khan, The University of Texas at El Paso Dr. Chunqiang Li, The University of Texas at El Paso Dr. Chris Navarro, Blue Origin Dr. David Nemir, TXL Group, Inc. Mr. Luis Ochoa, The University of Texas at El Paso Mr. Abraham Trujillo, The University of Texas at El Paso Dr. Jorge Villalobos, Shell WindEnergy Services Inc Dr. Jianguo Wu, The University of Texas at El Paso Keynote Speakers: John Applewhite Chief of Propulsion System, NASA-Johnson Space Center Charles Chase Sr. Program Manager Lockheed Martin Skunk Works Nick Gonzales Director, Systems Engineering Space Systems Company Lockheed Martin Southwest Emerging Technology Symposium THE UNIVERSITY OF TEXAS AT EL PASO APRIL 8th – 9th, 2016 April 8th 4:00 pm RECEPTION/PRE-REGISTRATION - The University of Texas at El Paso - Engineering/CCSB Courtyard April 9th 6:30 am REGISTRATION - Wyndham El Paso Airport - Room: Main Lobby 7:30 am BREAKFAST - Wyndham El Paso Airport - Room: Rosewood 8:00 am OPENING NOTES - Dr. Yirong Lin, Assistant Professor, Department of Mechanical Engineering, The University of Texas at El Paso - Room: Rosewood 8:05 am INTRODUCTION - Dr. Ahsan Choudhuri, Professor and Chair, Department of Mechanical Engineering, The University of Texas at El Paso - Room: Rosewood 8:10 am WELCOME - Dr. Howard C. Daudistel, Interim Provost, The University of Texas at El Paso - Room: Rosewood 8:30 am KEYNOTE SPEAKER – I INTRODUCTION - Dr. Norman Love - Room: Rosewood 8:30 am KEYNOTE PRESENTATION – I - TITLE: Integrated LO2/CH4 Technologies and Systems Solutions Relevant to Human Mars Exploration - John Applewhite, Chief of Propulsion System, Propulsion & Power Division, NASA JSC - Room: Rosewood 9:50 am PARALLEL TECHNICAL SESSIONS I Session 1-A Additive Manufacturing I - Room: Walnut Session 1-B Emerging Technologies I - Room: Satinwood Session 1-C Space Systems - Room: Sandalwood Session 1-D Energy and Sustainability I - Room: Orchid Session 1-E Aerospace and Energy Materials I - Room: Poplar 10:00 am SPECIAL SESSION: HIGH SCHOOL INFO SESSION - Moderator: Dr. Ryan Wicker - Room: A/V Theater 10:50 am BREAK AND POSTER SESSION - Room: Main Lobby 11:10 am PARALLEL TECHNICAL SESSIONS II Session 2-A Additive Manufacturing II - Room: Walnut Session 2-B Emerging Technologies II - Room: Satinwood Session 2-C Propulsion and Energy Technologies I - Room: Sandalwood Session 2-D Energy and Sustainability II - Room: Orchid Session 2-E Aerospace and Energy Materials II - Room: Poplar 12:10 pm LUNCH - Room: Rosewood 12:20 pm KEYNOTE SPEAKER – II INTRODUCTION - Dr. Ryan Wicker - Room: Rosewood 12:20 pm KEYNOTE PRESENTATION – II - TITLE: Interactions - Charles Chase, Sr. Program Manager, Revolutionary Technology Programs at Lockheed Martin Skunk Works - Room: Rosewood 1:50 pm PARALLEL TECHNICAL SESSIONS III Session 3-A Additive Manufacturing III - Room: Walnut Session 3-B Emerging Technologies III - Room: Satinwood Session 3-C ITAR 1: Propulsion and Energy Technologies II - Room: Sandalwood Session 3-D Energy and Sustainability III - Room: Orchid Session 3-E Aerospace and Energy Materials III - Room: Poplar 3:30 pm BREAK AND POSTER SESSION - Room: Main Lobby 3:50 pm PARALLEL TECHNICAL SESSIONS IV Session 4-A Propulsion and Energy Technologies III - Room: Walnut Session 4-B Emerging Technologies IV - Room: Satinwood Session 4-C ITAR 2: Propulsion and Energy Technologies IV - Room: Sandalwood Session 4-D Energy and Sustainability IV - Room: Orchid Session 4-E Aerospace and Energy Materials IV - Room: Poplar 5:30 pm DINNER - Room: Rosewood 5:40 pm KEYNOTE SPEAKER - III INTRODUCTION - Dr. Pavana Prabhakar - Room: Rosewood 5:40 pm KEYNOTE PRESENTATION – III - TITLE: Lockheed Martin Space Systems Company - Nick Gonzales, Director, Systems Engineering, Space Systems Company, Lockheed Martin - Room: Rosewood 7:00 pm ADJOURN ABOUT THE SPEAKERS John Applewhite John Applewhite is currently the Chief of the Propulsion Systems Branch in the Propulsion & Power Division (PPD) at the NASA Johnson Space Center (JSC) in Houston. A graduate of Texas A&M University with a BS in Mechanical Engineering, he began his career at NASA in 1989 and now leads a group responsibility for the development and oversight of spacecraft propulsion systems for human spaceflight including systems on the Orion, Commercial Crew, and International Space Station programs. The Propulsion Systems Branch at JSC is also actively involved in technology development and demonstration efforts relevant to human exploration missions with a focus on integrated liquid oxygen (LO2)/methane (CH4) propulsion and integrated spacecraft systems. In his 27 year career at NASA, John has worked primarily in the field of propulsion having previously served as a Subsystem Manager for the Space Shuttle Orbiter Reaction Control System, a System Manager for the ISS propulsion elements and visiting vehicles, a NASA Systems Engineer for the Orbiter Main Propulsion System, and as the Division Chief Engineer with responsibility over all PPD Space Shuttle Orbiter systems including the main propulsion orbital maneuvering and reaction control, and auxiliary power systems. Outside of propulsion, John also served as a Project Lead Engineer for the Orion Crew Module vehicle and as a branch chief in the Vehicle Systems Engineering & Integration Branch. ABOUT THE SPEAKERS Charles Chase Charles Chase manages the Revolutionary Technology Programs organization for the Lockheed Martin Skunk Works. The organization’s charter is to create, mature, and transition a broad range of disruptive technologies with significant Lockheed Martin system impact. Technology focus areas include: power and propulsion systems; RF and optical meta-materials; cognitive and physiological human performance monitoring; new sensor modalities; adaptive and bio-inspired structures; and plasma flow control devices. He recently won the Lockheed Martin Innovate the Future contest with “Power from Low Speed Wind”, and was a semifinalist in the Buckminster Fuller Challenge with “Bio-Inspired Morphing” to eliminate design stagnation. He presented his organization’s work on compact fusion power and propulsion at the 2013 Google “Solve for <X>” event. He was a low observable engineer on the F-117A production program and has also worked for the Lockheed Martin Space Systems Company as an electromagnetics group lead. He is a co-founder of CBH Technologies, a start-up developing next generation lighting technology and holds numerous patents. ABOUT THE SPEAKERS Nick Gonzales Nick Gonzales serves as Director of Systems Engineering at Lockheed Martin (LM) Space Systems Company (SSC). He is responsible for approximately 1500 engineers and accountable for systems engineering and technology strategy spanning all products, from sensor systems and missile defense to human spaceflight and deep-space missions. Previously, Mr. Gonzales performed the duties of Director and Chief Engineer for Lockheed Martin Space Systems Advanced Interceptor Programs. In this role, he was responsible for guiding the design of Lockheed Martin’s offering for the next generation interceptor kill vehicle. The purpose of this kill vehicle was to enhance homeland defense against missile attack. When the Government decided they would assemble the best industry had to offer into a cohesive design, Mr. Gonzales served as the LM representative to that industry team. Prior to embarking on that journey, Mr. Gonzales dedicated a large portion of his career to developing and fielding the THAAD interceptor. He started this effort in the systems test group where he set up the launch control room for implementation of countdown go/no-go operations and managed the $90M development of the production test equipment used to ATP the missile rounds. He served as the manager of systems integration when the focus was on getting the interceptor qualified for flight. Mr. Gonzales transitioned to CSE during the flight test program, focusing on flight test mission success and on resolving issues discovered during flight operations. Finally, he served as the Director and CE of the THAAD interceptor, driving hard to obtain the approval of the United States Government to release the interceptor to the war fighters in order to defend our troops, friends, and allies in their theater of operation. The THAAD Missile Program employed approximately 200-700 people, dependent on the particular point in the life cycle, and continues to generate 400 million in sales to both US and Foreign Militaries for Lockheed Martin each year. Under his leadership, the THAAD missile team has provided the Missile Defense Agency (MDA) and the Nation with a missile system that has demonstrated groundbreaking capability and reliably achieving a perfect mission success record. Mr. Gonzales has actively participated in and led the development efforts associated with Missile Systems, Missile Software, Missile Structure/Propulsion Elements and all Test Equipment. Mr. Gonzales has over 28 years of successful hands on engineering experience and has held leadership positions in Engineering and Program Management. He received his bachelors of science in mechanical engineering from San Jose State University with a minor in electronics. He is a recipient of the prestigious Lockheed Martin NOVA award and has received various other recognition awards from the corporation. PARALLEL TECHNICAL SESSION I Session 1-A: Additive Manufacturing I | Room: Walnut | Wyndham El Paso Airport Session Chair: David Espalin, UTEP 9:50 am (1A-1): Design And Development Of The Material Handling Components For The Multi3D System - S. Ambriz, D. Espalin, J. Coronel, M. Perez, R. Wicker, UTEP 10:10 am (1A-2): Additive Manufacturing For Bonded Composite Joints - R. Garcia, E. Acuna, P. Prabhakar, UTEP 10:30 am (1A-3): Fabrication And Modeling of Smart Parts Using Electron Beam Melting Additive Manufacturing Technology - R. Martinez, M. S. Hossain, J. A. Gonzalez, M. A. I. Shuvo, J. Mireles, A. Choudhuri, R. B. Wicker, Y. Lin, UTEP Session 1-B: Emerging Technologies I | Room: Satinwood | Wyndham El Paso Airport Session Chair: Cesar Garcia, LMC 9:50 am (1B-1): Spatially Variant Periodic Structures In Electromagnetics (Presentation Only) - Raymond Rumpf, UTEP 10:10 am (1B-2): Numerical Simulation Of Ultrasonic Wave Propagation In Fiber-Enhanced Dielectric Nanocomposites For Quality Inspection - J. Wu, Y. Lin, B. Tseng, UTEP 10:30 am (1B-3): Location Of A Maximum Deflection Point With Fiber Bragg Gratings (Fbg) In Polarization Maintaining (Pm) Optical Fiber - J. Quintana, UTEP Session 1-C: Space Systems | Room: Sandalwood | Wyndham El Paso Airport Session Chair: Louis Everett, UTEP 9:50 am (1C-1): Daedalus: Lox/Lch4 Suborbital Testbed Design - J. Adams, J. Trillo, A. Johnson, A. Choudhuri, UTEP 10:10 am (1C-2): Trajectory Simulation of a Terrier Improved Orion Launch Vehicle - D. Camacho, J. Holt, M. Everett, Dr. Angel Flores Abad, UTEP 10:30 am (1C-3): Dynamic Modelling of a Free-Floating Space Manipulator - J. Yepez, J. De la Torre, A. Flores-Abad, UTEP Session 1-D: Energy and Sustainability I | Room: Orchid | Wyndham El Paso Airport Session Chair: Jorge Villalobos, Shell 9:50 am (1D-1): Bidding In Wholesale Energy Market - M. M. P. Chowdhury, J. Juarez, C. Kiekintveld, UTEP 10:10 am (1D-2): Use Of Life Cycle Sustinability Assessment For Energy Applications - B.A. Benedict, UTEP 10:30 am (1D-3): Transactive Energy Systems - E. Galvan, P. Mandal, UTEP Session 1-E: Aerospace and Energy Materials I | Room: Poplar | Wyndham El Paso Airport Session Chair: David Nemir, TXL Group 9:50 am (1E-1): Room Temperature Processed Cuscn Hole Transportation Layers For The Use In Perovskite Based Solar Cells - J. Galindo, M. Martinez, S. Shahriar, V. Castenada, D. Kava, C. Sana, D. Hodges, UTEP 10:10 am (1E-2): Synthesis Of Cu2ZNSNSXSEX-4 Thin Films Absorber Layers For Low-Cost, High Efficiency Thin Film Solar Cells - C. Sana, S. Shahriar, J. Galindo, D. Kava, V. Castaneda, M. Martinez, E. Castro, L. Echegoyen, D. Hodges, UTEP 10:30 am (1E-3): Crysatllization Of Poly(3-Hexylthiophene) On Carbon Derivatives For Organophotovoltaic Application - A. Mishra, V.S.A. Challa, K.C. Nune1, R.D.K Misra, D. Hodges, UTEP SPECIAL SESSION Special Session: High School Info Session | Room: AV Theater | Wyndham El Paso Airport Moderator: Ryan Wicker, UTEP 10:00 am: Dr. Ryan Wicker, Professor, Mr and Mrs. McIntosh Muchison I Endowed Charied Professor, Director, W.M. Keck Ceter for 3D Innovation, UTEP 10:15 am: John Applewhite, Chief, Propulsion Systems Branch, NASA-Johnson Space Center 10:30 am: Nick Gonzales, Director, Systems Engineering, Space Systems Company, Lockheed Martin 10:45 am: Michael Everett, Staff Engineer, UTEP 11:30 am: Bowie High School and Hornedo Middle School - Stellar Students in Orbit (SSiO) PARALLEL TECHNICAL SESSION II Session 2-A: Additive Manufacturing II | Room: Walnut | Wyndham El Paso Airport Session Chair: Luis Ochoa, UTEP 11:10 am (2A-1): Developing A Controller For A Copper Wire Embedding Tool - J. F. Motta, D. Espalin, R. Wicker, UTEP 11:30 am (2A-2): A Novel Approach to Estimate Corrosion Effect in 3D Printed Bio Material’s Using Taguchi Method - S. D. Kilari, N. Kim, B. Tseng, UTEP 11:50 am (2A-3): Economic Analysis Between Powder Bed-Based Additive Manufacturing Technologies - J. A. Gonzalez, J. Mireles, Y. Lin, R. B. Wicker, UTEP Session 2-B: Emerging Technologies II | Room: Satinwood | Wyndham El Paso Airport Session Chair: Abraham Trujillo, UTEP 11:10 am (2B-1): Damage Tolerance And Assessment Of Unidirectional Carbon Fiber Composites - M. Flores, D. Mollenhauer, UTEP 11:30 am (2B-2): Design And Testing Of Hybrid Composite Materials For Cryogenic Fuel Tanks - R. Avila, Md. Islam, P. Prabhakar, UTEP 11:50 am (2B-3): Stress Corrosion Cracking Susceptibility Of Aluminum Foils For Aerospace Applications - E. Garcia, C. M. Stewart, UTEP Session 2-C: Propulsion and Energy Technologies I | Room: Sandalwood | Wyndham El Paso Airport Session Chair: Chris Navarro, Blue Origin 11:10 am (2C-1): Design Of An Optically Accessible High Intensity Turbulence Combustion System - A. Acosta-Zamora, A. de la Torre, A. Choudhuri, UTEP 11:30 am (2C-2): Combustion Synthesis Of Zirconium Diboride And Hafnium Diboride: Thermodynamic Analysis - S. Cordova, E. Shafirovich, UTEP 11:50 am (2C-3): Flame Front Imaging Techniques On A Backward Facing Step Stabilized Flame - A. de la Torre, A. Acosta-Zamora, A. Choudhuri, UTEP Session 2-D: Energy Sustainability II | Room: Orchid | Wyndham El Paso Airport Session Chair: Jorge Villalobos, Shell 11:10 am (2D-1): Impact of intermittent Renewable energy sources on Power system analysis - L. A. Gutierrez, P. Mandal, UTEP 11:30 am (2D-2): Converting Methane Waste To Valuable Materials - R.R. Chianelli, MRTI 11:50 am (2D-3): Comparison Of Two Idp Technologies In Detecting And Preventing Cyber-Attacks On Microgrid Communication Networks - G. K. Chalamasetty, P. Mandal, and B. Tseng, UTEP Session 2-E: Aerospace and Energy Materials II | Room: Poplar | Wyndham El Paso Airport Session Chair: Arifur Khan, UTEP 11:10 am (2E-1): Zinc Oxide Thin Film Preparation By Single Solution Deposition For Perovskite Solar Cells - M. F. Martinez, S. Shahriar, D. Kava, C. Sana, V. Castaneda, J. Galindo, D. R. Hodges, UTEP 11:30 am (2E-2): Pyroelectric Energy Harvesting With High Curie Temperature Material Linbo3 - J. Silva, H. Karim, MD R. H. Sarker, S. Shahriar, M. A. I. Shuvo, D. Delfin, D. Hodges, N. Love, Y. Lin, UTEP 11:50 am (2E-3): Thermal Stability And Oxygen Sensor Characteristic Of Ga2O3 Based High Temperature Oxygen Sensors - E. J. Rubio, S. Manandhar, C. V. Ramana, UTEP PARALLEL TECHNICAL SESSION III Session 3-A: Additive Manufacturing III | Room: Walnut | Wyndham El Paso Airport Session Chair: Cesar Garcia, LMC 1:50 pm (3A-1): Unified Software For Multi-Functional G-Code: A Method For Implementing Multi Technology Additive Manufacturing - E. Aguilera, D. Espalin, E. MacDonald, R. Wicker, UTEP 2:10 pm (3A-2): Failure Analysis Of Electron Beam Melted Ti-6Al- 4V Tensile Specimen - M. S. Haque, E. Arrieta, J. Mireles, C. Carrasco, C. M. Stewart, R. B. Wicker, UTEP 2:30 pm (3A-3): Multi3D System: Advanced Manufacturing With Material Handling Robotics - J. L. Coronel Jr., S. Ambriz, C. Kim, D. Espalin, R. B. Wicker, UTEP 2:50 pm (3A-4): Fabrication And Modeling of Smart Parts Using Electron Beam Melting Additive Manufacturing Technology - R. Martinez, M. S. Hossain, J. A. Gonzalez, M. A. I. Shuvo, J. Mireles, A. Choudhuri, R. B. Wicker, Y. Lin, UTEP 3:10 pm (3A-5): Development Of The Thermal Wire Embedding Apparatus For Fdm-Printed Parts - D. Marquez, UTEP Session 3-B: Emerging Technologies III | Room: Satinwood | Wyndham El Paso Airport Session Chair: Chunqiang Li, UTEP 1:50 pm (3B-1): Development of High-Temperature Digital Image Correlation Method - C. Ramirez, C. M. Stewart, UTEP 2:10 pm (3B-2): Optical Second Harmonic Generation Imaging For Ferroelectric Materials Studies - Y. Ding, C. Diaz-Moreno, A. Paez, Y. Wang, J. A. López, C. Li, UTEP 2:30 pm (3B-3): Metamaterial Based Passive Wireless Temperature Sensor For Temperatures Up To 500º - H. Karim, D. Delfin, L. A. Chavez, L. Delfin, J. Avila, C. Rodriguez, R.C. Rumpf, Y. Lin, & A. Choudhuri, UTEP 2:50 pm (3B-4): Compressive Properties Of Mock Polymer Bonded Explosive Using Digital Image Correlation - C. A. Catzin, C. M. Stewart, UTEP 3:10 pm (3B-5): High Temperature Measurement Using Lithium Niobate Ceramic Material - Md R. H. Sarker, H. Karim, R. Martinez, J. Silva, N. Love, Y. Lin, UTEP Session 3-C: ITAR 1 Propulsion and Energy Technologies II | Room: Sandalwood | Wyndham El Paso Airport Session Chair: Chris Navarro, Blue Origin 1:50 pm (3C-1): Decomposition Of HAN- and ADN-Based Monopropellants - R. Ferguson, E. Shafirovich, UTEP 2:10 pm (3C-2): Linear Burning Rate Measurements Of Hydroxylammonium Nitrate - J. Stahl, E. L. Peterse, Texas A&M University 2:30 pm (3C-3): Flame Studies Of LMP-103S Decomposition Products - K. Hogge, E. Flores, D. Camacho, A. Choudhuri, N. Love, UTEP 2:50 pm (3C-4): Development Of A Micro-Burner For Hybrid Rocket Combustion Studies - J. C. Thomas, J. Stahl, and E. L. Petersen, Texas A&M University 3:10 pm (3C-5): High Test Peroxide Thruster Development - J. Mona Mejia, A. Choudhuri, UTEP Session 3-D: Energy and Sustainabiity III | Room: Orchid | Wyndham El Paso Airport Session Chair: Angel Flores, UTEP 1:50 pm (3D-1): Analysis of Aerodynamics for shell eco marathon vehivle using computational fluid dynamics - C. Mata, J. F. Chessa, UTEP 2:10 pm (3D-2): Study Of Learning Effectiveness Of Project- Based Learning Method On Team-Based And Individual-Based Projects - H. Kim, A. Akundi, Y. Lin, T. Tseng, UTEP 2:30 pm (3D-3): Study Of Photolysis Rate Coefficients To Improve Air Quality Models For The El Paso-Juarez Airshed - S. Mahmud, P. Wangchuk, R. Fitzgerald, W. Stockwell, D. Lu, UTEP 2:50 pm (3D-4): Scenario Planning Applications For Energy Issues - B.A. Benedict, UTEP 3:10 pm (3D-5): Non-simultanous DG and capacitor banks allocation in distribution networks based on economic evaluation - S. Sajjadi, P. Mandal, and B. Tseng, UTEP Session 3-E: Aerospace and Energy Matrials III | Room: Poplar | Wyndham El Paso Airport Session Chair: Arifur Khan, UTEP 1:50 pm (3E-1): Temperature Sensing On Woven CFRP By Piezoelectric Particles - R. Martinez, E. Tarango, Y. Lin, UTEP 2:10 pm (3E-2): Impact Response Of Woven Composites - A. Castellanos, S. Md Shariful, P. Prabhakar, UTEP 2:30 pm (3E-3): Mechanical Properties Of Hot Mix Asphalt Materials At Room Temperature For Use In Aerospace Landing Applications - J. G. Reyes, C. M. Stewart, UTEP Session 3-E (Continued): 2:50 pm (3E-4): An Element Activation Approach for Modeling Electron Beam Sintering of Titanium - C. Beas, J. Chessa, UTEP 3:10 pm (3E-5): Artic Exposure Studies Of Vinyl Foams For Sandwich Composites - C. D. Garcia, P. Prabhakar, UTEP PARALLEL TECHNICAL SESSION IV Session 4-A: Propulsion and Energy Technologies III | Room: Walnut | Wyndham El Paso Airport Session Chair: Abraham Trujillo, UTEP 3:50 pm (4A-1): 500 Lbf Liquid Methane - Liquid Oxygen Throttleable Rocket Engine Design - J. Carroll, J. Candelaria, J. Trillo, C. Haynes, UTEP 4:10 pm (4A-2): Design And Development Of A 1 Mw Oxy-Fuel Mhd Combustor - B. Lovich, M.J. Hernandez, L. Cabrera, N. Love, UTEP 4:30 pm (4A-3): Design And Test Of Regenerative Cooling Channels And Injector For A 2000 Lbf Lox/Lch4 Engine - A. Sandoval, I. Lopez, L. Bugarin, J. Adams, S. Soto, A. Choudhuri, UTEP 4:50 pm (4A-4): Conceptual Design And Simulation Of A Directly Heated Oxyfuel Supercritical Combustor - A. Badhan, A S M A. Chowdhury, D. I. Aguilar, N. D. Love, A. R. Choudhuri, UTEP 5:10 pm (4A-5): The Design Of A LOX/LCH4 Reaction Control System Engine - A. Johnson, D. Ott, P. Nunez, R. Ponce, A. Choudhuri, UTEP Session 4-B: Emerging Technologies IV | Room: Satinwood | Wyndham El Airport Session Chair: Samia Afrin, UTEP 3:50 pm (4B-1): Free Edge Effect In Multidirectional Laminates - M.S. Islam, P. Prabhakar, UTEP 4:10 pm (4B-2): Numerical Study Of High-Temperature Sco2 Volumetric Receiver For Concentrating Solar Power System - A. Schiaffino, V. Kumar, UTEP 4:30 pm (4B-3): Design Optimization Of Sandwich Core And Manufacture Through Additive Manufacturing - M. Tauhiduzzaman, Md. S. Islam, P. Prabhakar, UTEP 4:50 pm (4B-4): Next Generation Computing Framework For Exascale Simulations - A. Chattopadhyay, VMK. Kotteda, V. Kumar, UTEP 5:10 pm (4B-5): 2-D Computational Model Of A Coaxial Swirl Fuel Injectior - J. Aboud, B. Lovich, O. Vidana, L. Cabrera, M.J. Hernandez, N. Love, A. Choudhuri, UTEP Session 4-C: ITAR 2 Propulsion and Energy Technologies IV | Room: Sandalwood | Wyndham El Paso Airport Session Chair: Michael Everett, UTEP 3:50 pm (4C-1): Laboratory-Scale Burning Of Composite Solid Propellant Using In-Situ Synthesized Iron Oxide - A. R. Demko, C. Dillier, T. Sammet, K. Grossman, S. Seal, E. L. Petersen, Texas A&M University 4:10 pm (4C-2): Delivery System For Bunker - J. M. Mejia, J. Holt, N. Love, A. Choudhuri, UTEP 4:30 pm (4C-3): Burning Rates Of Ap/Htpb-Based Solid Rocket Propellants Containing Graphene - C. A. M. Dillier, A. R. Demko, T. Sammet, K. Grossman, S. Seal, E. L. Petersen, Texas A&M University 4:50 pm (4C-4): Characterization Of AF-M315E Propellant For In-Space Applications - T. Belcher, J. Valenzuela, N. Love, A. Choudhuri, UTEP 5:10 pm (4C-5): Modern Scanning Electron Microscopy In The Study Of Solid Propellant Combustion: Surface Structure And Elemental Identification Via Eds - G. R. Morrow, A. R. Demko, E. L. Petersen, Texas A&M University Session 4-D: Energy and Sustainability IV | Room: Orchid | Wyndham El Paso Airport Session Chair: Jianguo Wu, UTEP 3:50 pm (4D-1): Effect Of Water And Heat Transport On Three- Phase Transient Behavior Of A PEFC - A. Nandy, C. Y. Wang, Northern New Mexico College 4:10 pm (4D-2): An Analysis Of A Photovoltaic Solar System Project In An Institution Of Higher Education - D. N. De Hoyos, B. Tseng, A. Olivarez, UTEP 4:30 pm (4D-3): Hall Effect Measurement Data - V. Vidal, UTEP 4:50 pm (4D-4): Hough transform based automatic segmentation of nanofibers from SEM images - Z. Hu, B. Tseng, Y. Lin, J. Wu, UTEP Session 4-E: Aerospace and Energy Materials IV | Room: Poplar | Wyndham El Paso Airport Session Chair: Deidra Hodges, UTEP 3:50 pm (4E-1): Optimization Of Aluminum-Doped Zinc Oxide Thin Films Via Variances In Annealing Temperature - V. Castaneda, S. Shahriar, C. Sana, M. Martinez, D. Kava, J. Galindo, and D. Hodges, UTEP 4:10 pm (4E-2): Study Of Tungsten-Yttrium Based Coatings For Nuclear Applications - G. Martínez, J. Chessa, S. Shutthanandan, T. Tevuthasan, M. Lerche, C.V. Ramana, UTEP Session 4-E (Continued): 4:30 pm (4E-3): Characterization And Analysis Of Structural Properties, Crystallography And Surface Potential Of Perovskite Thin Films - S. Shahriar, C. Sana, V. Castaneda, M. Martinez, D. Hodges, UTEP 4:50 pm (4E-4): Structural, Dielectric, And Piezoelectric Characterization Of Lead-Free Calcium And Cerium BaTiO3 Modified - J. A. Duran, C. Orozco, C. V. Ramana, UTEP 5:10 pm (4E-5): Physical And Optical Properties Of Czts Spin Coating And Doctor Blade Processing - D. Kava, S. Shahriar, M. Martinez, C. Sana, J. Galindo, V. Castaneda, D. R. Hodges, UTEP Session at a Glance Abbreviation | Title | Start Time | End Time | Location Keynote Presentation I - John Applewhite | 8:30 AM | 9:50 AM | Rosewood 1-A | Additive Manufacturing I | 9:50 AM | 10:50 AM | Walnut 1-B | Emerging Technologies I | 9:50 AM | 10:50 AM | Satinwood 1-C | Space Systems | 9:50 AM | 10:50 AM | Sandalwood 1-D | Energy and Sustainability I | 9:50 AM | 10:50 AM | Orchid 1-E | Aerospace and Energy Materials I | 9:50 AM | 10:50 AM | Poplar Special | High School Info Session | 10:00 AM | 12:00 PM | AV Theater 2-A | Additive Manufacturing II | 11:10 PM | 12:10 PM | Walnut 2-B | Emerging Technologies II | 11:10 PM | 12:10 PM | Satinwood 2-C | Propulsion and Energy Technologies I | 11:10 PM | 12:10 PM | Sandalwood 2-D | Energy & Sustainability II | 11:10 PM | 12:10 PM | Orchid 2-E | Aerospace and Energy Materials II | 11:10 PM | 12:10 PM | Poplar Keynote Presentation II - Charles Chase | 12:20 PM | 1:30 PM | Rosewood 3-A | Additive Manufacturing III | 1:50 PM | 3:30 PM | Walnut 3-B | Emerging Technologies III | 1:50 PM | 3:30 PM | Satinwood 3-C | ITAR 1 - Propulsion and Energy Technologies II | 1:50 PM | 3:30 PM | Sandalwood 3-D | Energy and Sustainability III | 1:50 PM | 3:30 PM | Poplar 3-E | Aerospace and Energy Materials III | 1:50 PM | 3:30 PM | Orchid 4-A | Propulsion and Energy Technologies III | 3:50 PM | 5:30 PM | Walnut 4-B | Emerging Technologies IV | 3:50 PM | 5:30 PM | Satinwood 4-C | Propulsion and Energy Technologies IV | 3:50 PM | 5:30 PM | Sandalwood 4-D | Energy and Sustainability IV | 3:50 PM | 5:30 PM | Poplar 4-E | Aerospace and Energy Materials IV | 3:50 PM | 5:30 PM | Orchid Keynote Presentation III - Nick Gonzales | 5:40 PM | 7:00 PM | Rosewood Conference Venue Layout Map (Wyndham El Paso Airport): - Registration: Near Conference Enter Entrance - Willow/Rosewood/Oakwood: Keynote Presentations, Breakfast/Lunch/Dinner - Walnut: Sessions 1A-2A, 3A-4A - Satinwood: Sessions 1B-2B, 3B-4B - Sandalwood: Sessions 1C-2C, 3C-4C - Orchid: Sessions 1D-2D, 3D-4D - Poplar: Sessions 1E-2E, 3E-4E - A/V Theatre: High School Info Session - Poster Session Area - Bathrooms & Executive Boardroom / Symposium Office - Wyndham Main Entrance Author Index Aboud J, 4B-5 Acuna E, 1A-2 Adams J, 1C-1, 4A-3 Aguilar D, 4A-4 Aguilera E, 3A-1 Akter T, 4E-3 Akundi A, 3D-2 Ambriz S, 3A-3, 1A-1 Arif M, 2E-2 Arrieta E, 3A-2 Avila J, 3B-3 Avila R, 2B-2 Badhan A, 4A-4 Beas C, 3E-4 Belcher T, 4C-4 Benedict B, 3D-4, 1D-2 Bugarin L, 4A-3 Cabrera L, 4B-5 Camacho D, 1C-2, 3C-3 Candelaria J, 4A-1 Carrasco C, 3A-2 Carroll J, 4A-1 Castaneda V, 4E-5, 4E-1, 4E-3, 2E-1, 1E-1, 1E-2 Castellanos A, 3E-2 Castro E, 4E-3, 1E-2 Catzin C, 3B-4 Chalamasetty G, 2D-3 Challa V, 1E-3 Chattopadhyay A, 4B-4 Chavez L, 3B-3 Chessa J, 3D-1, 4E-2, 3E-4 Chianelli R, 2D-2 Chintalapalle R, 4E-2, 4E-4, 2E-3 Choudhuri A, 1A-3, 3A-4, 3B-3, 1C-1, 4A-3, 3C-5, 2C-1, 4A-5, 2C-3, 4C-4, 3C-3, 4A-4, 4C-2, 4B-5 Choudhuri Ar, 4A-4 Chowdhury M, 1D-1 Cordova S, 2C-2 Coronel J, 3A-3, 1A-1 De Hoyos D, 4D-2 De la Torre A, 2C-1, 2C-3 De la Torre J, 1C-3 Deemer E, 4E-3 Delfin D, 2E-2, 3B-3 Delfin L, 3B-3 Demko A, 4C-1, 4C-5, 4C-3 Dillier C, 4C-1, 4C-3 Ding Y, 3B-2 Duran J, 4E-4 Echegoyen L, 4E-3, 1E-2 Espalin D, 2A-1, 3A-1, 3A-3, 1A-1 Everett M, 1C-2 Ferguson R, 3D-1 Fitzgerald R, 3D-3 Flores A, 1C-2, 1C-3 Flores E, 3C-3 Flores M, 2B-1 Galindo J, 4E-5, 4E-1, 2E-1, 1E-1, 1E-2 Galvan E, 1D-3 Garcia C, 3E-5 Garcia E, 2B-3 Garcia R, 1A-2 Gonzalez J, 1A-3, 3A-4 Gonzalez J, 2A-3 Grossman K, 4C-1, 4C-3 Gutierrez L, 2D-1 Haque M, 3A-2 Hasanul K, 2E-2 Haynes C, 4A-1 Hernandez M, 4A-2, 4B-5 Hodges D, 2E-2, 4E-5, 4E-1, 4E-3, 2E-1, 1E-1, 1E-2, 1E-3 Hogge K, 3C-3 Holt J, 1C-2, 4C-2 Hossain M, 1A-3 Hossain M, 3A-4 Hu Z, 4D-4 Islam S, 4B-1, 2B-2, 4B-3 Johnson A, 1C-1, 4A-5 Juarez J, 1D-1 Karim H, 3B-3, 3B-5 Kava D, 4E-5, 4E-1, 2E-1, 1E-1, 1E-2 Kiekintveld C, 1D-1 Kilari S, 2A-2 Kim C, 3A-3 Kim H, 3D-2 Kim N, 2A-2 Kotteda V, 4B-4 Kumar V, 4B-4, 4B-2 Lerche M, 4E-2 Li C, 3B-2 Lin Y, 1A-3, 3A-4, 3D-2, 1B-2, 4D-4, 2E-2, 3B-3, 3B-5, 3E-1, 2A-3 Lopez I, 4A-3 Lopez J, 3B-2 Love N, 2E-2, 3B-5, 4A-2, 4C-4, 3C-3, 4A-4, 4C-2, 4B-5 Lovich B, 4A-2 Lu D, 3D-3 Mahmud S, 3D-3 Manandhar S, 2E-3 Mandal P, 2D-1, 1D-3, 2D-3, 3D-5 Marquez D, 3A-5 Martinez G, 4E-2 Martinez M, 4E-5, 4E-1, 4E-3, 2E-1, 1E-1, 1E-2 Martinez R, 1A-3, 3A-4, 3B-5, 3E-1 Mata C, 3D-1 McDonald E, 3A-1 Mejia J, 3C-5, 4C-2 Mireles J, 1A-3, 3A-4, 3A-2, 2A-3 Mishra A, 1E-3 Misra R, 1E-3 Mollenhauer D, 2B-1 Moreno D, 3B-2 Morrow G, 4C-5 Motta J, 2A-1 Nandy A, 4D-1 Nunel K, 1E-3 Nunez P, 4A-5 Olivarez A, 4D-2 Orozco C, 4E-4 Ott D, 4A-5 Paez A, 3B-2 Perez M, 1A-1 Petersen E, 4C-1, 3C-2, 4C-5, 4C-3, 3C-4 Ponce R, 4A-5 Prabhakar P, 3E-5, 3E-2, 4B-1, 2B-2, 4B-3, 1A-2 Quintana J, 1B-3 Ramirez C, 3B-1 Reyes J, 3E-3 Rodriguez C, 3B-3 Rubio E, 2E-3 Rumpf R, 3B-3 Sajjadi S, 3D-5 Sammet T, 4C-1, 4C-3 Sana C, 4E-5, 4E-1, 4E-3, 2E-1, 1E-1, 1E-2 Sandoval A, 4A-3 Sarker R, 2E-2, 3B-5 Saupe G, 4E-3 Schiaffino A, 4B-2 Seal S, 4C-1, 4C-3 Shafirovich E, 2C-2, 3D-1, 3C-1 Shahriar S, 2E-2, 4E-5, 4E-1, 4E-3, 2E-1, 1E-1, 1E-2 Shariful S, 3E-2 Shutthanandan S, 4E-2 Shuvo I, 2E-2 Shuvo M, 3A-4 Silva J, 2E-2, 3B-5 Soto S, 4A-3 Stahl J, 3C-2, 3C-4 Stewart C, 3B-1, 3B-4, 2B-3, 3A-2, 3E-3 Stockwell W, 3D-3 Tarango E, 3E-1 Tauhiduzzaman M, 4B-3 Tevuthasan T, 4E-2 Thomas J, 3C-4 Trillo J, 1C-1, 4A-1 Tseng T, 3D-2, 4D-2, 1B-2, 4D-4, 2D-3, 3D-5, 2A-2 Valenzuela J, 4C-4 Vidal V, 4D-3 Vidana O, 4B-5 Wang C, 4D-1 Wang Y, 3B-2 Wangchuk P, 3D-3 Wicker R, 1A-3, 3A-4, 2A-1, 3A-2, 2A-3, 3A-1, 3A-3, 1A-1 Wu J, 1B-2, 4D-4 Yepez J, 1C-3 Zamora A, 2C-1, 2C-3 Department of Mechanical Engineering | Engineering Annex, Suite 126 The University of Texas at El Paso | 500 W. University Avenue | El Paso, TX 79968-0521 Phone (915) 747 5450 | Fax (915) 747 5019 | me.utep.edu [email protected] | [email protected] | [email protected] Logos Present: UTEP, cSETR (MIRO Center for Space Exploration and Technology Research), W.M. Keck Center for 3D Innovation, Shell.